Skip to content
Positive Grid

PORTABLE SMART AMP & EFFECTS PEDAL WITH BUILT-IN LOOPER

BUY NOW
¥34,980
Spark PEDAL
¥34,980

Your rig. One pedal. Zero compromise.

Spark PEDAL puts an entire gig-ready rig, a smart effects processor, and a looper in a single, hassle-free setup. No menus. No complex routing. Just legendary tone, anywhere you plug in.

The rig follows you now.

Get the highlights

Any rig.
Any setup.

Plugs into everything. PA, pedalboard, laptop, headphones & more.

Built-in 60-second looper.

Record, overdub, undo. Hands-free.

Up to 7-hour rechargeable battery.

Plays through rehearsal, the gig, and after.

33 amps. 43 effects. 100,000+ tones.

Powered by the same HD Tone Engine in Spark 2.

One pedal.
Every situation.

Spark PEDAL is built around one idea:
your tone shouldn't be tied to one room or one rig.

Guitarist playing direct to PA with Spark Pedal

Direct to PA

Show up, plug in, and rip. Two ¼″ line outputs send a full, cabinet-emulated stereo signal straight to the front-of-house desk. Soundcheck in seconds.

Playing Spark Pedal silently with headphones

Headphones

⅛″ stereo headphone output. Full amp and effects at any hour, with zero noise.

Recording with Spark Pedal over USB-C into a laptop

Desktop recording

Plug in over USB-C and your DAW sees Spark PEDAL as an audio interface. Studio-quality sound, direct to your session.

Spark Pedal on a pedalboard

Pedalboard

Drop Spark PEDAL into your existing board and add a full amp and effects rig to the setup you already play.

Guitarist jamming along with the Spark app on their phone and Spark PEDAL

Jam along to anything

Pair your mobile device over Bluetooth and jam along to your own playlists, backing tracks, and favorite songs.

Spark Pedal running into a guitar amp

Into your amp

Already have an amp you love? Keep it. Switch off the cab sim and use Spark PEDAL as a dedicated effects processor in front of your existing rig. 43 effects, your amp, your tone.

Spark PEDAL sliding into a gig bag pocket

On the road

Up to 7 hours on a rechargeable battery. Practice. Warm up. Record. It's all here.

Guitarist leaning into a riff with Spark PEDAL on the floor

Great tone.
No setup
required.

Powered by Spark’s HD Tone Engine. This isn’t just modeling — it’s a living, breathing ecosystem. The exact same high-definition DSP architecture as Spark 2, the world’s best-selling practice amp. All dialed in for electric, acoustic, and bass guitars.

33

Amp Models

43

Effects

100,000+

ToneCloud tones

Your Spark library, unplugged.

Every preset you’ve built. Every tone you’ve saved on ToneCloud. It’s all there, the moment you log in.

Dual-Mode Controls.
Instant Flexibility.

Spark PEDAL gives you deep control without the complexity.
Five multifunction knobs and three heavy-duty footswitches adapt instantly between amp and effects control.

Spark Pedal control surface — Amp Mode active

Dial in your Gain, Bass, Mid, and Treble in real time — exactly like a traditional amp head.

6 presets customizable

Save your favorite sounds and switch between them on the fly. Six slots, two banks, one tap to recall.

Built-in tuner

A full-featured tuner is built right in —
no extra pedal, no extra cables, no compromise.

Dynamic LED feedback

Color-coded LEDs show mode, preset, looper status, and battery level at a glance.

Guitarist tapping a tone on the Spark app, with Spark PEDAL and amp in the background Guitarist tapping a tone on the Spark app, with Spark PEDAL and amp in the background

Hear it in your head.
Play it now.

The free Spark app connects to Spark PEDAL and puts powerful tone-building tools right in your hands. Build your signal chain from a full library of amps, cabs, and effects. Explore 100,000+ tones on ToneCloud. Describe what you’re after and Spark AI builds it for you. The depth of a complete setup — always with you, always growing.

  • Spark AI screen generating presets from a typed prompt

    Spark AI

    AI BETA

    Type a phrase, a song, an artist, or a feeling and get tones that match. Tweak them, save them, make them yours.

  • Build Your Rig screen with amp and effects signal chain

    Build Your Rig

    Design your signal chain block by block. Choose amps, stompboxes, and effects, then fine-tune every parameter to taste.

  • Auto Chords screen showing real-time chord detection

    Auto Chords

    Play a song through the app and Auto Chords shows you the chords in real time. Follow along immediately — no tab hunting, no guessing.

  • ToneCloud screen browsing community-shared tones

    ToneCloud®

    Browse and download from over 100,000 tones shared by guitarists around the world. Find one, save it, take it anywhere.

Spark PEDAL with the Creative Looper app open on a phone docked above it
Guitarist leaning back mid-jam, Spark PEDAL on the floor beside him

Looper

Build it.
Layer it.
Jam over it.

The built-in 60-second looper turns Spark PEDAL into a writing, practice and performance tool. Lay down a base, stack overdubs, undo and redo with intuitive footswitch control.

  • Record, overdub, play, stop, undo, and clear — all hands-free

  • 60 seconds of loop time per layer

  • Dedicated switches mean no menu hunting mid-loop

Bass, acoustic, and electric guitars leaning against a couch in front of giant PEDAL lettering, with a Spark PEDAL on the floor

Built
to move
with you.

Rugged chassis, heavy-duty steel switches, and a footprint that fits any setup. Set it on your desk for a recording session, drop it on the floor for the gig, or slot it into your pedalboard at rehearsal. However you want to play, Spark PEDAL is ready.

Spark PEDAL back panel: input, output, MIDI, USB-C and headphone jacks

  • Center knob — Amp/FX mode selector

  • Gain, Bass, Mid, Treble knobs

  • 3 heavy-duty footswitches

  • Dynamic LED indicators

  • Built-in tuner

  • ¼″ instrument input (electric, acoustic, or bass)

  • Two ¼″ line outputs (L/Mono + R)

  • ⅛″ stereo headphone output

  • USB-C (charging, firmware updates, audio interface)

  • ⅛″ MIDI in/out

  • ¼″ TRS expression pedal input

  • Bluetooth 5.0 + WiFi 2.4GHz

Specs

Main Input Power

DC 5V/1A (USB)

Battery Type

Built-in 3000mAh rechargeable lithium-ion battery

Play Time

Up to 7 hours

Charging Time

Approx. 4.5 hours

Top Panel Controls & Displays

3 x Steel Footswitches for Preset Switching, Looper Control
4 x Knobs for Effects Control & Amp Tone Control
1 x Multifunction Control Knob for Amp Selection & Volume Control
6 x Footswitch Indicators (Multiple Color LEDs) for Preset & Looper Status
1 x Global Status Indicator (Multiple Color LED Ring)
1 x Power Indicator (To display battery level and charging status)
1 x Connection Indicator

Rear Panel Controls & I/o

Power Button
Pair Button
1 x 1/4" Input
2 x 1/4" Line Output
1 x 1/4" TRS Expression Pedal Input
1 x USB-C Port for Charging, Service, and Audio Interface
2 x 1/8" MIDI Input and Output Port
1 x 1/8" Headphone Output

Wireless Connectivity

Bluetooth 5.0 for Bluetooth Audio and Wireless Connection with Companion App
Wi-Fi (2.4GHz) for OTA (Over-the-Air) Firmware Update

Box Contents

Spark PEDAL
USB-C to USB-C Cable
MIDI 3.5mm (1/8") to Standard DIN 5-pin Adapter x 2
Quick Start Guide

Dimensions

L 175 x W 104 x H 47.2 mm (Knob/Switch excluded) / H 54.8 mm (Knob/Switch included)
(L 6.89 x W 4.1 x H 1.86 inch / H 2.16 inch)

Weight

0.56 kg
1.23 lb

Mobile Apps

Spark App for iOS and Android (included)
iOS App: Learn more
Supported iOS version: iOS 12 or later
Android App: Learn more
Supported Android OS version: Android 8.1 or later

FAQ

What is Spark PEDAL?

Spark PEDAL is the only pedal that brings the complete Spark experience. It combines a portable smart amp and effects pedal with a built-in looper that brings the full Spark experience into a single device designed for electric, acoustic, and bass guitar players. It provides a massive tone library, and deep app integration — into any setup, anywhere you play.

Instead of carrying multiple pedals or building a complex setup, Spark PEDAL gives you a complete guitar rig in one compact unit that works at home, in the studio, at rehearsal, or on stage, so you can take your Spark tones anywhere.

What makes Spark PEDAL different from other multi-effects pedals?

Traditional multi-effects pedals are often built around menu navigation, preset browsing, and manual tone building. To create a sound, players typically spend time adjusting amp settings, effects chains, and EQ parameters step by step.

Spark PEDAL takes a different approach. It combines instant tone creation, hands-on controls, portability, and Spark ecosystem integration into one compact pedal.

Spark PEDAL combines:

• Full Spark App integration with ToneCloud access
• A built-in rechargeable battery for cable-free portability
• Fast hands-on controls without deep menu diving
• Easy, fast tone building with text-to-tone capabilities
• A built-in looper controlled directly from the footswitches
• Compact size designed for real-world portability

In practice, this means you can move quickly between creating tones, practicing, recording, rehearsing, and performing without carrying a large pedalboard or building complicated signal chains.

The result is a more streamlined experience focused on helping players spend less time configuring gear and more time playing.

Who is Spark PEDAL for?

Spark PEDAL is designed for players who want great tone and flexibility without the complexity of a large pedalboard or deep menu systems.

It’s especially suited for:

• Existing Spark users who want to bring their Spark tones into any setup
• Home players and creators who want fast, inspiring tones with minimal setup
• Guitarists who play rehearsals, open mics, church gigs, or small stages
• Players who want a compact all-in-one solution for practice and performance
• Musicians who want flexible setups using headphones, amps, PA systems, or recording interfaces

What instruments can I use with Spark PEDAL?

Spark PEDAL supports electric guitar, acoustic guitar, and bass guitar.

Does Spark PEDAL replace a traditional amp?

It can, depending on your setup.

Spark PEDAL includes amp modeling, effects, and stereo line outputs, so you can connect directly to headphones, PA systems, powered speakers, FRFR cabinets, recording interfaces, or traditional guitar amps.

Some players may use it as their complete rig, while others may integrate it into an existing pedalboard or amplifier setup.

How does Spark PEDAL create tones?

Spark PEDAL combines amp models, effects, and tone tools to help you quickly create playable guitar tones.

You can start in different ways:

• shaping tones directly from the pedal using onboard controls
• using Text to Tone to describe a sound in natural language
• browsing and loading presets from ToneCloud
• using the Spark App for full amp and effects editing

Spark PEDAL then combines amp modeling, EQ, and effects into a playable sound you can hear immediately.

From there, you can continue refining the tone without rebuilding it from scratch. You can adjust amp settings, effects, and overall feel directly from the pedal or through the Spark App.

This creates a faster workflow focused on moving from an idea to a usable sound quickly, while still allowing deeper editing when you want it.

How does Text to Tone work?

Text to Tone -available through the Spark Pedal app- allows you to describe the type of sound you want in natural language.

For example, you might enter phrases like “warm blues lead,” “ambient clean with long reverb,” or “tight modern metal rhythm.” Spark PEDAL interprets your description and generates a matching amp and effects setup automatically.

Instead of manually building a tone step by step, you can start from a musical idea and then refine it further if needed.

Can I still tweak tones manually?

Yes. You can adjust gain, bass, mid, treble, effects, and overall tone directly from the pedal using the onboard knobs. The Spark App also provides deeper editing options for additional refinement.

Generated tones are designed to be fast starting points — not locked presets.

How many amps and effects are included?

Spark PEDAL includes 33 amp models and 43 effects, along with access to more than 100,000 community-created tones through ToneCloud.

How do the onboard controls work?

Spark PEDAL is designed around fast, hands-on control without requiring deep menu navigation.

In Amp Mode, the main knob selects amp types while the gain, bass, mid, and treble knobs adjust your amp tone.

In FX Mode, the knobs select and control drive, modulation, delay, and reverb effects directly from the pedal.

The three onboard footswitches also serve dual purposes depending on the selected mode:

• Preset Mode allows you to switch between saved presets in real time
• Looper Mode gives you direct access to recording, overdubbing, playback, stop, undo, and loop clearing

This layout allows you to shape tones, switch sounds, and control looping quickly in real time without interrupting your playing. While in Looper Mode, you can still adjust amp and effects parameters using the onboard knobs. You can also switch between your pre-selected presets in the Red and Green banks by pressing footswitches 2 and 3 together, making it easy to move between sounds such as rhythm and lead tones while a loop is playing.

If you need to perform actions that are only available outside Looper Mode—such as saving a preset or selecting a different preset directly from the pedal—the looper playback will stop when you exit Looper Mode. For more advanced preset switching while keeping the looper running, you can use the Spark App, MIDI control, or Spark Control X.

How many presets can I save?

Spark PEDAL allows you to save up to 6 custom presets across 2 banks.

How do the footswitches work?

Spark PEDAL includes 3 steel footswitches that operate in different modes depending on how you're using the pedal.

The onboard knobs are used for tone shaping. In Amp Mode, they control amp selection and amp parameters. In FX Mode, they allow you to select, adjust, or bypass effects directly from the pedal.

The footswitches are used for performance control. In Preset Control Mode, they let you switch between saved presets during practice or live performance. In Looper Control Mode, they provide direct access to recording, overdubbing, playback, stop, undo, and loop clearing.

LED indicators provide visual feedback for presets, looper status, and active modes during use.

Can I switch presets during live performance?

Yes. Spark PEDAL is designed for real-time preset switching using the onboard footswitches.

Does Spark PEDAL include a built-in looper?

Yes. Spark PEDAL includes a built-in looper controlled directly from the footswitches.

What can the looper do?

The built-in looper supports recording, overdubbing, playback, stop, undo, and loop clearing directly from the pedal.

It’s designed for practice, songwriting, improvisation, and live performance without requiring an external looper pedal.

Do I need an external looper pedal?

No. Spark PEDAL already includes a built-in looper, so no additional looper pedal is required.

Does Spark PEDAL work with the Spark App?

Yes. Spark PEDAL fully integrates with the Spark App for iOS and Android.

What can I do in the Spark App?

The Spark App allows you to:

• Create tones using Spark AI
• Access included amps and effects
• Edit and organize presets
• Browse and share tones on ToneCloud
• Update firmware
• Access additional practice and creative tools

The app expands the pedal’s capabilities while keeping the hardware itself simple and immediate to use.

Does Spark PEDAL support ToneCloud?

Yes. Spark PEDAL includes access to ToneCloud, where you can browse, save, and share tones with the Spark community.

Can I use Spark PEDAL without the app?

Yes. Core functions like preset switching, tone shaping, effects control, and looping can all be used directly from the pedal.

The Spark App provides deeper editing and AI-powered features, but the pedal itself is designed to remain easy to use on its own.

What outputs does Spark PEDAL include?

Spark PEDAL includes stereo 1/4” line outputs, a 1/8” stereo headphone output, USB‑C connectivity, MIDI input/output, and an expression pedal input.

This allows it to work across a wide range of practice, recording, and live performance setups.

Can I use Spark PEDAL with headphones?

Yes. Spark PEDAL includes a headphone output for silent practice.

Can I connect Spark PEDAL directly to a PA system?

Yes. Spark PEDAL includes stereo line outputs designed for direct connection to PA systems, powered speakers, or recording interfaces.

Can I use Spark PEDAL with my existing amp?

Yes. Spark PEDAL can be integrated into existing guitar amp and pedalboard setups. You can also disable the cab simulation and amp modeling within Spark PEDAL, allowing you to use it primarily as an effects unit with your existing amplifier and rig configuration.

Does Spark PEDAL work as an audio interface?

Yes. The USB‑C connection supports audio interface functionality for recording and computer connectivity.

Does Spark PEDAL support MIDI?

Yes. Spark PEDAL includes MIDI input and output via 1/8” TRS MIDI connections, and also comes with included adapters for standard 5-pin DIN MIDI devices. This allows you to integrate Spark PEDAL with a wide range of traditional MIDI-compatible gear and setups.

Does Spark PEDAL support an expression pedal or wah?

Yes. Spark PEDAL includes a 1/4” TRS expression pedal input.

Does Spark PEDAL have a built-in battery?

Yes. Spark PEDAL includes a built-in rechargeable lithium-ion battery.

How long does the battery last?

Spark PEDAL provides up to approximately 7 hours of play time under standard use conditions.

How long does charging take?

Full charging takes approximately 4.5 hours via USB‑C.

Why is the rechargeable battery important?

The built-in battery allows you to play without needing external power cables or power supplies.

This makes Spark PEDAL especially useful for travel, hotel practice, backstage warmups, portable rehearsal setups, and minimalist live rigs.

Is Spark PEDAL designed for live performance?

Yes. Spark PEDAL is designed for home, rehearsal, studio, and stage use.

Its compact design, built-in battery, preset switching, stereo outputs, and integrated looper make it suitable for a wide range of portable and live performance setups.

Can I practice silently?

Yes. Spark PEDAL supports silent practice using headphones.

Is Spark PEDAL easy to use for beginners?

Yes. Spark PEDAL is designed to simplify the process of getting great tones.

Instead of requiring deep menu navigation or complicated signal-chain building, it focuses on fast hands-on control, AI-assisted tone creation, and streamlined workflows that help players start playing quickly.

At the same time, it still provides enough flexibility for experienced players who want to refine and customize their sound.

What devices support the Spark App?

Spark PEDAL supports the Spark App for:

• iOS (iOS 15 or later)
• Android (Android 8.1 or later)

Does Spark PEDAL support wireless connectivity?

Yes. Spark PEDAL supports Bluetooth 5.0 for app connection and Bluetooth audio, along with Wi‑Fi (2.4GHz) for over-the-air firmware updates.

Can Spark PEDAL receive firmware updates?

Yes. Firmware updates are supported through Wi‑Fi and the Spark ecosystem.

What’s included in the box?

Spark PEDAL includes the pedal itself, a USB‑C charging cable, MIDI adapters, and a Quick Start Guide.

How big is Spark PEDAL?

Spark PEDAL measures approximately 175 x 104 x 54.8 mm (6.89 x 4.1 x 2.16 inches).

How much does Spark PEDAL weigh?

Spark PEDAL weighs approximately 0.56 kg / 1.23 lbs.

Videos

Spark PEDAL Commercial

One PEDAL. Real reactions.

Spark PEDAL Walkthrough

Spark PEDAL - 30s PEDAL Macro

Spark PEDAL - Cancer Bats Playthrough

¹ Spark LINK sold separately.

Warning