Order by December 15 for delivery by December 24.

Skip to content
Positive Grid

5 Ways to Use Spark CAB 2 (and What Plugs Where)

5 Ways to Use Spark CAB 2 (and What Plugs Where)

Positive Grid's Spark CAB 2 is a 140-watt powered cab that works five ways: as a full-size speaker for your Spark, as one power hub for the rig, as a cab for your pedalboard or multi-effects unit, as a stage monitor that also feeds the PA, and as a shared speaker for bass, keys and e-drums. Each setup below shows what plugs where. For every jack and switch, keep the Spark CAB 2 user guide and manual handy too.

So the box is open, the cab is in the corner, and your Spark is perched on top looking pretty pleased with itself. Now what? The fun thing about Spark CAB 2 is that it isn't really one thing. It plugs into whatever rig you already have and makes it bigger.

Setup Plug into Input Selector Power
Spark at home Spark Input (3.5mm) Spark Input DC out or USB-C
One-outlet rig Spark Input (3.5mm) Spark Input DC out or USB-C
Pedalboard or modeler XLR/TRS combo input Combo inputs Your gear's own
Monitor + PA Your source in, XLR out to PA Matches your source Wall
Bass, keys, e-drums XLR/TRS combo input Combo inputs Your gear's own

Whichever setup you pick, the hookup habit is the same:

  1. Power everything off and turn the levels down.
  2. Make your connections and set the Input Selector.
  3. Power on your amp or source first, then the cab.
  4. Bring the volume up slowly.

When you're done, switch the cab off before your amp. The other way around can cause a loud pop.

How to Connect Spark 2 to Spark CAB 2

Your Spark sounds great at your desk. Then friends come over, everybody ends up in the living room, and you want the sound to fill the whole space. That's not your Spark falling short. It's a home amp doing the job it was made for, and Spark CAB 2 gives it more room to work with.

Run the 3.5mm stereo cable from the box between your Spark's headphone/line out and the cab's Spark Input, then set the Input Selector to Spark Input. That's it, and it works the same for Spark 2, Spark 40, Spark GO, Spark MINI and Spark PEDAL. At living-room volume, flip the Contour switch on. It brings back the lows and highs that slip away when you're keeping things neighborly.

Your Spark's own speaker mutes by default, so everything comes from the cab. If you run Spark 2 from its line out instead (a 1/4-inch cable into a combo input, Input Selector on the combo inputs), you choose whether its speakers stay on in the Spark app. And Spark CAB 2 comes in Black and Pearl to match Spark 2, so the stack looks like it belongs together.

Spark app: Choose whether Spark 2’s speakers stay on with Spark CAB 2. Get the Spark app
Spark CAB 2
Spark CAB 2
£299 GBPIVA incl.
● Disponibile · Spedito da PG

140W powered FRFR cabinet that turns any Spark amp into a full rig.


Run Your Whole Rig From One Outlet

Two power bricks, one free outlet, and a cable situation behind the couch nobody wants to look at. Plug the cab into the wall and let it take care of your amp.

Spark 2 runs off the DC out with the DC adapter from the box, and Spark 40 uses the same DC out with the included DC cable. Spark GO, Spark MINI and Spark PEDAL charge from the USB-C out with your amp's USB-C cable. The DC out is only for Spark 2 and Spark 40, so don't use it to power other pedals. And the cab's Power switch also turns off the DC and USB-C outputs, so when the cab goes off, so does your amp.


Give Your Pedalboard or Multi-Effects Unit a Cab

Your board sounds incredible in headphones, but there's nothing to plug it into. Spark CAB 2 is a full-range speaker for line-level rigs, so it slots right in.

Spark PEDAL is the easy one. It goes into the Spark Input like any other Spark, and the USB-C out keeps it charged. For other modelers, multi-effects units and amp-modeling pedals, run the output into an XLR/TRS combo input and set the Input Selector to the combo inputs. Amp sims work the same way: take your audio interface's line out into a combo input, and software like BIAS X comes through the cab just like hardware would.

One rule matters here. Spark CAB 2 works with any gear that has a line-level output, but it isn't for tube amp heads or traditional amps, and plugging one in can damage both pieces of gear. To pair a multi-effects unit with a traditional amp, use your amp's effects loop instead.


Use Spark CAB 2 as Your Monitor and PA Feed

The band has a PA, the vocals sound great out front, and you still can't hear yourself. Run the balanced XLR output to the PA or mixer, and the cab becomes your personal monitor while it sends your sound to the room.

Speaker Volume sets what you hear on stage and Line Out Volume sets what the room hears, and the two are completely independent. If you pick up hum, flip the Ground Lift switch. At gig volume, turn Contour off, since the cab doesn't need that low-volume help once things get loud. And there's plenty on tap for a rehearsal room or a small stage.

For the full stage setup, see Playing a Show with Spark CAB.


Share It With the Bass, Keys and E-Drums

Between the bass, the keyboard and the kid's e-drum kit, your house might be shopping for three speakers. The combo inputs take any line-level source, not just guitar.

A bass through a preamp, a modeler or anything with a line out goes into the XLR/TRS combo inputs, and so do keys, synths, e-drum modules and backing tracks from a laptop or interface. Set the Input Selector to the combo inputs and whoever's playing is good to go. As a full-range cab, it covers everything from the bottom of a bass line to the top of a synth pad. The exception is microphones: a mic needs a mixer or preamp first, then it goes into a combo input like everything else.


FAQ

Will Spark CAB 2 work with my tube amp?

No. Spark CAB 2 is made for line-level sources. Tube amp heads and traditional amps aren't compatible, and connecting one can damage both pieces of gear.

Can I plug a microphone straight into Spark CAB 2?

Not directly. Run the mic through a mixer or preamp first, then into an XLR/TRS combo input. The user guide covers every input.

Does Spark CAB 2 power my Spark?

Its DC out powers Spark 2 (with the adapter in the box) and Spark 40, and its USB-C out charges Spark GO, Spark MINI and Spark PEDAL. It doesn't power Spark EDGE or Spark LIVE.

Is Spark CAB 2 stereo?

No, it's mono. The Spark Input is a stereo 3.5mm jack, but the cab plays back in mono.


Keep Going

  • New to the cab: start with our Spark CAB 2 introduction
  • Coming from the original Spark CAB: Spark CAB 2: What's New and Who It's For
  • Wondering what FRFR means: What Is an FRFR Cabinet?
  • Specs at a glance: 140W RMS, up to 118 dB (RMS), 45 to 20,000 Hz, mono
  • Ready to build one of these rigs: check out Spark CAB 2, or hear it in person at a music shop near you

Rimani aggiornato con Positive Grid

Iscriviti per ricevere consigli e tutorial, video, aggiornamenti e molto altro.

Warning