Spark CAB is a 140 Watt powered FRFR guitar cabinet/speaker designed to work seamlessly with Spark 40, Spark MINI, and Spark GO amps - providing a hassle-free setup and operation, as well as other gear and digital modeling processors. The Spark CAB provides guitarists with a versatile and high-quality sound reproduction solution for use in live performances, recording sessions, and home practice. The cabinet features a 10-inch woofer and 2 high-frequency dome tweeters, powered by a built-in 140-watt Class D amplifier.

Spark CAB is the perfect way to amplify and add loudness to your favorite Spark amp as well as other instruments, gear and digital modeling processors, so you can bring your tones and setups to the stage, enjoy live experiences with a band, and much more. 

Spark CAB is a mono FRFR cabinet/speaker. 

Spark CAB can reach up to 120dB when measured at a distance of 1 meter, making it comparable to standard guitar amps used in live performances, which typically reach around 115dB at the same distance.

When we say that Spark CAB is a 140 Watt cabinet, we are measuring how much output our power amp can produce. This is measuring RMS or root mean square. RMS watts refers to continuous power handling of a speaker or a subwoofer or how much continuous power an amplifier can output. Other speakers that say they are 2000 Watts or something similar, are measuring the peak output of the speakers, not the power amp. The peak power handling capacity is the maximum power level the cabinet can handle in short bursts, while the RMS power handling is a more sustained power level. These two measurements are not measuring the same thing! We agree this can be confusing. You can refer to the dB output of a products to understand better how much volume it can produce.  Spark CAB can reach up to 120dB when measured at a distance of 1 meter, making it comparable to standard guitar amps used in live performances, which typically reach around 115dB at the same distance.

Spark CAB is an FRFR cabinet, meaning it's compatible with various amplifier types, such as digital amp processors, digital amp and effects floorboards, amp sims, or any gear that has a line-level output.

You cannot use Spark CAB with traditional amps, such as tube amp heads and the like, because the power transferred is not compatible with Spark CAB and could potentially cause damage to both pieces of equipment.

Yes, Spark CAB is compatible with various instruments, including bass, keyboards, synths, electronic drums, and any other instrument with a line level output.

• Dedicated 1/8" stereo input for all Spark amps – cable is included
• 2 combo XLR/TRS mono inputs for plugging in other gear
• 1 XLR out for sending your sound to a PA or other speakers
• Input Selector - Switch between the 3.5 mm Spark Input and the two mono XLR/TRS Combo Inputs 
• Speaker Volume
• Line Out Volume
• Ground Lift Switch
• Contour Switch - Boosts low and high frequencies to improve balance at low volumes

Spark CAB weighs 29.76lbs (13.5kg). Its dimensions are 19.39 x 15.74 x 10.04 in (492.5 x 399.8 x 255 mm).

All cables included are 1 meter long. 

Spark CAB includes the following: a Spark 3.5mm stereo audio cable for connecting your Spark series amp, a DC power cable for Spark 40, a power cord, a Quick Start Guide, and a Safety Instructions Card.

Yes, but only for direct PA amplification through the two mono XLR/TRS Combo Inputs.

No, you cannot directly connect a microphone to Spark CAB. To use a microphone with Spark CAB, you’ll need to connect it to a preamp or mixer with a line out, which can then be connected to Spark CAB.

Spark CAB weighs just under 30lbs, making it lighter and more portable than other amps and cabs in its class. It also features 2 recessed handles for convenient transportation. 

Although the grille is removable, we are not currently providing alternatives or personalization options.

Currently, Spark CAB is available directly from our website in the US, EU, UK, Canada, and Australia. Other regions will be coming soon. Additionally, you might find Spark CAB at a select local retailer in your area. Feel free to use our store locator to check for nearby outlets.

Yes, Spark CAB is designed to work seamlessly with Spark amps.  If you own a Spark 40, you will first need to update its firmware to optimize the output quality. More info: https://help.positivegrid.com/hc/en-us/articles/360038685111-Spark-Firmware-Update-Video-Tutorial-

You can learn more about Spark CAB, Spark app, and all of our boundary-pushing guitar gear at our official website.